NETC.com https://www.netc.com:443/bb/ |
|
300e display shows cpm counts, but online shows 0cpm? https://www.netc.com:443/bb/viewtopic.php?f=13&t=867 |
Page 1 of 1 |
Author: | EB63139B [ Mon Mar 10, 2014 3:40 am ] |
Post subject: | 300e display shows cpm counts, but online shows 0cpm? |
300e appears to be measuring cpm... display shows dynamic, updating counts in what has been the usual range. But... online I display as 0 cpm. Advice please. |
Author: | KingCobra [ Mon Mar 10, 2014 10:44 am ] |
Post subject: | Re: 300e display shows cpm counts, but online shows 0cpm? |
EB63139B wrote: 300e appears to be measuring cpm... display shows dynamic, updating counts in what has been the usual range. But... online I display as 0 cpm. Advice please. Feel free to email staff@netc.com or harlan@netc.com if an ADMIN does not answer your tech problem here first. |
Author: | hey [ Tue Mar 11, 2014 8:32 am ] |
Post subject: | Re: 300e display shows cpm counts, but online shows 0cpm? |
There is a new version ready to be uploaded to your PI. It fixes problem with spikes and daylight time change. Email staff@netc.com and we will upload the new version. |
Author: | normgtg [ Sun Jul 06, 2014 1:37 pm ] |
Post subject: | Re: 300e display shows cpm counts, but online shows 0cpm? |
I have a simular problem. I have a 300a usb to hp laptop. Before attempting to register I ran the "logger" program, my logger displayed cpm readings 40 times higher than my 300a. Since then I have tried to register, no luck, emailed for assistance in registering, no luck. |
Author: | EB63139B [ Sun Jul 06, 2014 3:54 pm ] |
Post subject: | Re: 300e display shows cpm counts, but online shows 0cpm? |
It would *appear* in my case the issue had to do with my cpu not getting the data from the 300e, and this strongly *appears* via testing and deduction to be centered around the stability of the USB connection/port on the 300e. If I were dealing with that situation again, I'd definitely start there. Ensure everything's properly seated, swap the cable, etc. In my case, we used a right-angle usb adapter at the 300e, and while it hasn't eliminated the issue entirely, it has drastically improved the reliability by probably close to 90%. |
Author: | Grayling Skies [ Fri Jul 11, 2014 9:34 pm ] |
Post subject: | Re: 300e display shows cpm counts, but online shows 0cpm? |
Hello world! New station, Grayling Skies, Portland, Maine coming on line today. I had the same problem, having 0 CPM out. I had changed one thing, using a different USB connection on my laptop. The computer has to be rebooted to re-establish the datalink. Once I realized it, that fixed it for me. In messing around with the beta versus gamma feeds to my horror I also discovered my station went from one of the safest to one of the locations with the highest concentrations of gamma rays in the nation. I don't even know how to get the gamma readouts. I will have to do some catching up on my reading. GS And find a good avatar! |
Page 1 of 1 | All times are UTC - 6 hours [ DST ] |
Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |