A small air filter in front of the GC will help a lot. Here is my picture.
| Attachments: |
|
WP_20131215_003.jpg [ 308.37 KiB | Viewed 31058 times ] |
| NETC.com https://www.netc.com:443/bb/ |
|
| New station EB612540 (and configuring with Apple Airport) https://www.netc.com:443/bb/viewtopic.php?f=13&t=968 |
Page 1 of 1 |
| Author: | EB612540 [ Sun May 04, 2014 3:46 pm ] |
| Post subject: | New station EB612540 (and configuring with Apple Airport) |
Hello, New station EB612540 is now up in Califon NJ, 07830, Tewksbury township in Hunterdon county. Unit will be located outside in a well ventilated shed (screened windows). Please advise if there's a more preferable location for these without going to extremes. Also, I had to figure out some things in order to set my SSID password on an Apple Airport Extreme router. First, I plugged the PI into one of the Airport's LAN ports. However, Airport utility (after version 5.x) no longer displays info for wired devices. In terminal, I ran the following command: snmpwalk -v 2c -c public 10.1.10.1 ipNetToMediaPhysAddress which gave me a list of all connected devices. (Replace 10.1.10.1 with the IP address of your airport extreme.) It's then easy to find the MAC address with one's station name in it. Use the IP address (e.g. 10.1.10.32 in my case) associated with your PI's MAC address in the browser's url field. Config of the SSID passphrase was then as described in the NETC docs. Station may be up/down intermittently as I get it wired and placed for good. Thanks, EB612540 |
|
| Author: | hey [ Sun May 04, 2014 5:38 pm ] | ||
| Post subject: | Re: New station EB612540 (and configuring with Apple Airport | ||
A small air filter in front of the GC will help a lot. Here is my picture.
|
|||
| Author: | EB612540 [ Tue May 06, 2014 10:31 am ] |
| Post subject: | Re: New station EB612540 (and configuring with Apple Airport |
hey, thanks for posting that. a question about the filter and one about the interfaces on the PI: - what is the purpose of the filter? to keep air clean around the GC? to keep airflow on the GC? would the filter not need to be changed/cleaned regularly to avoid rad particles from accumulating and slowly increasing the averages over time? - so the MAC address assigned to the wired interface is the station name (e.g. EB612540). what about the wireless interface? is it a variant of the wired MAC address or entirely different? thanks. |
|
| Author: | hey [ Tue May 06, 2014 10:45 am ] |
| Post subject: | Re: New station EB612540 (and configuring with Apple Airport |
The filter is to collect the radioactive material on the filter and the GC would be able to detect it. The EPA uses filters in their units and we are understanding why. The MAC address is for the USB port on the PI and if you use a cable to the the router, you would have a second MAC address to access the PI. |
|
| Page 1 of 1 | All times are UTC - 6 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|